1.After 4 months use of the anode jacking system, the break will not work well due to the enlarged break clearance as the worn break pad.

2.Loose the socket bolt 1 with 8mm socket head wrench counterclockwise; loose nut 2 counterclockwise with 19 open-end wrench.

3.Turn the socket bolt 1 with 8mm socket head wrench clockwise, adjust the distance between break magnetic 3 and break disc 4 to make it within 1mm evenly.

4.After adjust the distance, turn the lock nut 2 clockwise with 19 open-end wrench and at the same time watch the distance between the break magnetic 3 and break disc 4 to make sure the distance is within 1mm evenly at 4 points.

5.Turn on the electricity and watch if the break disc works smoothly.