ZHENGZHOU JODA TECHNOLOGY CO., LTD. The Largest Aerogel Material Manufacturer In China

New Products

latest news

{dede:field.title/}{dede:field.title/}{dede:field.title/}{dede:field.title/}

ALUMINIUM ALLOY ROD CONTINUOUS CASTING AND ROLLING LINE

General Description: The line adopts new type 4-wheel continuous casting machine and the technology of continuous casting and rolling to produce aluminum alloy rod with the diameter of 9.5mm the alloy grades include the 1000 series of conductive round

  • Product Details
  • Inquiry
General Description:
 The line adopts new type 4-wheel continuous casting machine and the technology of continuous casting and rolling, to produce aluminum alloy rod with the diameter of 9.5mm, the alloy grades include the 1000 series of conductive round aluminum rod, 3000 series of Al-Mn, 5000 series of Al-Mg, 6000 series of Al-Mg-Si, and 8000 series.
(6201 5005, 5205, 5305, 5505, 5605, 5006, 5010, 5310, 5210 and 5110 6101A-6005)

Advantages:
During production of al-alloy rod, induction heater ensures the process temperature requirements of the casting blank for rolling, with the function of hearing and adjusting can have quenching online. 

The outlet of the guiding pipe is equipped with a water blowing device to clean off the moisture on the surface of the aluminum alloy rod. Meanwhile, it is also equipped with an active traction gear to ensure a smooth delivery of the aluminum alloy rod. 

The arc guiding pipe is a trolley-guiding construction to reduce the scratch upon the aluminum alloy has pre-deformation before entering the rod collection frame; on the other hand, the end of rod drops down into the frame automatically in case of broken rod. 

Give that the device of frame changes for wire rod accumulating, the rod coils are kept in order in collection frame to realize continuous coiling. 

Brief Technological Process

Melting furnace (prepared by user)→Holding Furnace (prepared by user)→Online degassing →Online filtration→4-wheel continuous casting machine→Straightening machine→Front haulage machine→Rolling shear→Heater→Material feeding device→Continuous rolling machine→Coiling stand→Aluminum alloy rod

Main technical parameters:
Rolling type: 3 roller Y type
Finished Rod type: 1350EC, 8030、8176 al. alloy rod, 6201、6101 al. alloy rod
Finished Rod Dia.: Φ9.5±0.5mm, Φ12±0.5mm
Line speed: 8 m/s
Capability: 5.5-6 T/H
  • Next:None

A free consultation

Related Product

Warehouse insulation

Refrigerated warehouse insulation is the most important component of the stable operation of the refr...

5L+1L Small Laboratory Supercritical Extraction Equipment

5L+1L Supercritical CO2 Extraction Equipment.Supercritical fluid CO2 technology is a new and clean is...

25L*2 Supercritical Fluid Co2 Extraction Machine

Description: The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemi...

CO2 Supercritical Extraction Machine

CO2 Supercritical Extraction Machine This system is multi-function SCFE equipment the working mode is...

Roof and Loft Insulation

Roof and loft insulation Compared to other parts of the building the roof and or loft has as a rule t...

Herbal Oil Supercritical CO2 Extraction Machine

The SuperCritical fluid technology is a new-type separation technology in modern chemical separation....