Electrolytic Aluminum Equipment

Joda Tech mainly provide the anode jacking system, the busbar jacking frame, vacuum ladle, ladle cleaning machine, anode clamp, point feeder, Silica Aerogel Composite and other complete products and related services for the global electrolytic aluminum enterprises.

Laterial Clamping ABRF (Hydraulic Version)

The automatic anode beam raising equipment (ABRE) is used to lift the anode busbar periodically. The automatic ABRE is regularly lifted bythe PTM to the area above the pot.The frame-equipped devices are handled byremote controlfor operations such as clamp

Details

Automatic Anode Jacking Frame

The automatic anode jacking frame (hydraulic wrench) is known as anode busbar raising frame, short as AJR or ABRF, which is used to hold the anode rod, loosen and fasten the anode clamp with hydraulic wrench during the lifting of anode busbar.

Details

Automatic Anode Jacking Frame (Pneumatic Wrench)

The automatic anode jacking frame is known as anode busbar raising frame, short as AJF or ABRF, which is used to hold the anode rod, loosen and fasten the anode clamp with pneumatic wrench during the lifting of anode busbar.

Details

Ladle Cleaning Machine

Ladle cleaning machine is designed to clear inner wall of ladles for aluminium smelters, remov aluminium slags and dregs adhering to the inner surface. It could relieve workload, improve working environment and efficiency, and ensure planned al...

Details

Vacuum Ladle

Joda has designed and developed a new generation of vacuum ladle with capacity from 3T to 16T.

Details

Anode Jacking System

Anode jacking system is used for the anode lifting of the baking electrolytic aluminum potshell to ensure that the anode is operating under optimal operating conditions.

Details

Anode Assembly Hanger

Anode assembly is also referred to as anode hanger, it is assembled by welding with aluminium stem (rod) and steel bracket (yoke) with transition joint insert(also refered to as a clad) in between.

Details

Anode Yoke

Anode yoke also known as cast bracket spider can be made by welding of the steel plates and steel round bar, or casting from steel scraps. For welding of steel plates, normally Q235B steel will be used. For casting, low carbon steel (C max 0.25%) is more

Details

Automatic Anode Jacking Frame (Pneumatic Wrench)

The automatic anode jacking frame, which is used to hold the anode rod, loosen and fasten the anode clamp with pneumatic wrench during the lifting of anode busbar. !

Go to top

Print page

Get connected

Youtube

Electrolytic Aluminum Equipment

Laterial Clamping ABRF (Hydraulic Version)

The automatic anode beam raising equipment (ABRE) is used to lift the anode busbar periodically. The automatic ABRE is regularly lifted bythe PTM to the area above the pot.The frame-equipped devices are handled byremote controlfor operations such as clamp

Automatic Anode Jacking Frame

The automatic anode jacking frame (hydraulic wrench) is known as anode busbar raising frame, short as AJR or ABRF, which is used to hold the anode rod, loosen and fasten the anode clamp with hydraulic wrench during the lifting of anode busbar.

Automatic Anode Jacking Frame (Pneumatic Wrench)

The automatic anode jacking frame is known as anode busbar raising frame, short as AJF or ABRF, which is used to hold the anode rod, loosen and fasten the anode clamp with pneumatic wrench during the lifting of anode busbar.

Ladle Cleaning Machine

Ladle cleaning machine is designed to clear inner wall of ladles for aluminium smelters, remov aluminium slags and dregs adhering to the inner surface. It could relieve workload, improve working environment and efficiency, and ensure planned al...

Vacuum Ladle

Joda has designed and developed a new generation of vacuum ladle with capacity from 3T to 16T.

Anode Jacking System

Anode jacking system is used for the anode lifting of the baking electrolytic aluminum potshell to ensure that the anode is operating under optimal operating conditions.

Anode Assembly Hanger

Anode assembly is also referred to as anode hanger, it is assembled by welding with aluminium stem (rod) and steel bracket (yoke) with transition joint insert(also refered to as a clad) in between.

Anode Yoke

Anode yoke also known as cast bracket spider can be made by welding of the steel plates and steel round bar, or casting from steel scraps. For welding of steel plates, normally Q235B steel will be used. For casting, low carbon steel (C max 0.25%) is more

Automatic Anode Jacking Frame (Pneumatic Wrench)

The automatic anode jacking frame, which is used to hold the anode rod, loosen and fasten the anode clamp with pneumatic wrench during the lifting of anode busbar. !

Aluminum Products

Rolling Mill

Electrolytic Aluminium

CONTACT

Fackbook

Twitter

Linkedin

Google+

Pinterest

Mail

Favorite

0086-371-5517 8216
0086-13383847446
Web Whatsapp +86 18236958493
APP Whatsapp +86 18236958493

jodatech@joda-tech.com

Electrolytic Aluminum Equipment

The automatic anode beam raising equipment (ABRE) is used to lift the anode busbar periodically. The automatic ABRE is regularly lifted bythe PTM to the area above the pot.The frame-equipped devices are handled byremote controlfor operations such as clamp

The automatic anode jacking frame (hydraulic wrench) is known as anode busbar raising frame, short as AJR or ABRF, which is used to hold the anode rod, loosen and fasten the anode clamp with hydraulic wrench during the lifting of anode busbar.

The automatic anode jacking frame is known as anode busbar raising frame, short as AJF or ABRF, which is used to hold the anode rod, loosen and fasten the anode clamp with pneumatic wrench during the lifting of anode busbar.

Ladle cleaning machine is designed to clear inner wall of ladles for aluminium smelters, remov aluminium slags and dregs adhering to the inner surface. It could relieve workload, improve working environment and efficiency, and ensure planned al...

Joda has designed and developed a new generation of vacuum ladle with capacity from 3T to 16T.

Anode jacking system is used for the anode lifting of the baking electrolytic aluminum potshell to ensure that the anode is operating under optimal operating conditions.

Anode assembly is also referred to as anode hanger, it is assembled by welding with aluminium stem (rod) and steel bracket (yoke) with transition joint insert(also refered to as a clad) in between.

Anode yoke also known as cast bracket spider can be made by welding of the steel plates and steel round bar, or casting from steel scraps. For welding of steel plates, normally Q235B steel will be used. For casting, low carbon steel (C max 0.25%) is more

Automatic Anode Jacking Frame (Pneumatic Wrench)

The automatic anode jacking frame, which is used to hold the anode rod, loosen and fasten the anode clamp with pneumatic wrench during the lifting of anode busbar. !

Aluminum Products

Rolling Mill

Electrolytic Aluminium

CONTACT

Share

Fackbook

Twitter

Linkedin

Google+

Pinterest

Mail

Favorite

0086-371-5517 8216 0086-13383847446Web Whatsapp +86 18236958493APP Whatsapp +86 18236958493

jodatech@joda-tech.com

0086-371-5517 8216
0086-13383847446
Web Whatsapp +86 18236958493
APP Whatsapp +86 18236958493